3.9.7 8-8* FC Port Diagnostics
These parameters are used for monitoring the Bus
communication via the FC Port.
8-80 Bus Message Count
Range:
Function:
0
*
[0 - 0 ] This parameter shows the number of valid
telegrams detected on the bus.
8-81 Bus Error Count
Range:
Function:
0
*
[0 - 0 ] This parameter shows the number of telegrams
with faults (e.g. CRC fault), detected on the bus.
8-82 Slave Message Count
Range:
Function:
0
*
[0 - 0 ] This parameter shows the number of valid
telegrams addressed to the slave, sent by the
frequency converter.
8-83 Slave Error Count
Range:
Function:
0
*
[0 - 0 ] This parameter shows the number of error
telegrams, which could not be executed by the
frequency converter.
Range:
Function:
0
*
[0 - 0 ] This parameter shows the number of messages
sent from this frequency converter.
Range:
Function:
0
*
[0 - 0 ] This parameter shows the number of messages
suppressed due to time-out.
3.9.8 8-9* Bus Jog
8-90 Bus Jog 1 Speed
Range:
Function:
100 RPM
*
[ 0 - par. 4-13
RPM]
Enter the jog speed. Activate this
fixed jog speed via the serial port
or fieldbus option.
8-91 Bus Jog 2 Speed
Range:
Function:
Size related
*
[ 0 - par. 4-13
RPM]
Enter the jog speed. Activate this
fixed jog speed via the serial
port or fieldbus option.
8-94 Bus Feedback 1
Range:
Function:
0
*
[-200 -
200 ]
Write a feedback to this parameter via the
serial communication port or fieldbus option.
This parameter must be selected in
,
or
as a feedback
source.
8-95 Bus Feedback 2
Range:
Function:
0
*
[-200 - 200 ] See
for further details.
8-96 Bus Feedback 3
Range:
Function:
0
*
[-200 - 200 ] See
for further details.
Parameter Description
VLT
®
Refrigeration Drive Programming Guide
MG16H102 - VLT
®
is a registered Danfoss trademark
83
3
3