Parameter 627 Nameplate: Power section version:
The ID number of the unit's power section appears here.
Example: ID 1.15.
Parameter 628 Nameplate: Application option type:
Here you can see which types of application options are installed in the
frequency converter.
Parameter 630 Nameplate: Communication option type:
Here you can see which types of communication options are installed in
the frequency converter.
Parameter 632 Nameplate: BMC software identification:
The ID number of the BMC software appears here.
Parameter 634 Nameplate: Unit identification for communication:
The ID number for communication appears here.
Parameter 635 Nameplate: Software section no.:
The software section number appears here.
Parameter 640 Nameplate: Software version:
The unit's present software version number appears here. Example: 1.00
Parameter 641 Nameplate: BMC software identification:
The ID number of the BMC software appears here.
Parameter 642 Nameplate: Power card identification:
The ID number of the unit's power part appears here. Example: 1.15
678
Configure Control Card
Value:
Standard version (STANDARD VERSION)
[1]
Profibus 3 Mbaud Version
(PROFIBUS 3 MB VER.)
[2]
Profibus 12 Mbaud Version
(PROFIBUS 12 MB VER.)
[3]
Function:
This parameter enables a configuration of a Profibus Control Card. The
default value depends on the produced unit, also being the maximum
obtainable value. This means, that a control card only can be down gra-
ded to a lower performance version.
3 Programming
VLT® Decentral FCD
86
MG.04.B8.02 - VLT is a registered Danfoss trademark
3
