Danfoss VLT AAF00x, Инструкция по эксплуатации

Страница: 58 / 117

•
Planning a communication network off-line. MCT
10 Set-up Software contains a complete active
filter database
•
Commissioning active filters on line
•
Saving settings for all active filters
•
Replacing an active filter in a network
•
Simple and accurate documentation of active
filter settings after commissioning.
•
Expanding an existing network
•
Future developed active filters will be supported
Save filter settings:
1. Connect a PC to the unit via USB com port.
(NOTE: Use a PC, which is isolated from the line
power, in conjunction with the USB port. Failure
to do so may damage equipment.)
2. Open MCT 10 Set-up Software
3. Choose “Read from drive”
4. Choose “Save as”
All parameters are now stored on the PC.
Load filter settings:
1. Connect a PC to the unit via the USB com port.
2. Open MCT 10 Set-up Software
3. Choose “Open” – stored files will be shown
4. Open the appropriate file
5. Choose “Write to drive”
All parameter settings are now transferred to the filter.
A separate manual for MCT 10 Set-up Software is available :
MG.10.Rx.yy .
The MCT 10 Set-up Software modules
The following modules are included in the software
package:
MCT 10 Set-up Software
Setting parameters
Copy to and from unit
Documentation and print out of parameter
settings incl. diagrams
Ext. user interface
Preventive Maintenance Schedule
Clock settings
Timed Action Programming
Smart Logic Controller Set-up
Ordering number:
Please order the CD containing MCT 10 Set-up Software
using code number 130B1000.
MCT 10 Set-up Software can also be downloaded from the
Danfoss Internet:
WWW.DANFOSS.COM, Business Area:
Motion Controls .
How to Operate the Active F... VLT Active Filter AAF 00x
MG.90.V2.22 - VLT
®
is a registered Danfoss trademark 5-7
5 5