Danfoss VLT AAF00x, Инструкция по эксплуатации, Страница: 53 / 117

Function Set-ups", "Q3-1 General Settings", "Q3-11 Display
Settings".
Each value/measurement readout parameter selected in
0-20 Display Line 1.1 Small to 0-24 Display Line 3 Large has
its own scale and number of digits after a possible decimal
point. Larger numeric values are displayed with few digits
after the decimal point.
Ex.: Current readout 5.25 A; 15.2 A 105 A.
Status display I
This readout state is standard after start-up or initialization.
Use [INFO] to obtain information about the value/
measurement linked to the displayed operating variables
(1.1, 1.2, 1.3, 2 and 3).
See the operating variables shown in the display in this
illustration. 1.1, 1.2 and 1.3 are shown in small size; 2 and
3 are shown in medium size.
S ta tus
0.0% 0.0% 0°C
3(3)
1.3
3
2
1.2
1.1
0A
0A
O t op
130BB469.10
Status display II
See the operating variables (1.1, 1.2, 1.3 and 2) shown in
the display in this illustration.
In this example, the small readouts are: Power Factor in
the upper left corner (position 1.1). THiD of Current in the
middle top (position 1.2), The line power current is
displayed in the upper right corner (1.3). Large readouts
are the Output current (position 2), and, lastly, underneath
the line power frequency is the reactive current at position
3.
1.1, 1.2 and 1.3 are shown in small size; 2 is shown in large
size.
1.1 Power Factor
1.2 THD of Current [%]
1.3 Mains Current [A]
2 Output Current [A]
3 Mains Frequency
Info:
130BB470.10
Status:
Bottom section
always shows the state of the unit in status mode.
Top section
Middle section
Bottom section
Status
43 RPM
1.4 Hz
Auto Remote Running
! Pwr.card temp (W29)
2.9%
5.44 A 25.3 kW
1(1)
130BP074.10
!
Display contrast adjustment
Press [status] and [
▲ ] for darker display
Press [status] and [ ▼ ] for brighter display
LEDs:
If certain threshold values are exceeded, the alarm and/or
warning LED lights up. A status and alarm text appear on
the control panel.
The On LED is activated when the unit receives power
from AC line voltage, a DC bus terminal or an external 24
V supply. At the same time, the back light is on.
•
Green LED/On: Control section is working.
•
Yellow LED/Warn.: Indicates a warning.
•
Flashing Red LED/Alarm: Indicates an alarm.
On
Warn.
Alarm
130BP044.10
LCPkeys
Menu keys
The menu keys are divided into functions. The keys below
the display and LEDs are used for parameter set-up,
including choice of display indication during normal
operation.
130BP045.10
Status
Quick
Menu
Main
Menu
Alarm
Log
[Status]
Indicates the status of the filter. Use the [Status] key to
toggle single or double read-out mode - 5 line readouts, 4
line readouts.
Use [Status] for selecting the mode of display or for
changing back to display mode from either the quick
menu mode, the main menu mode or alarm mode.
[Quick Menu]
Allows quick set-up of the unit. The most common
functions can be programmed here.
The [Quick Menu] consists of:
- Q1: My Personal Menu
- Q2: Quick set-up
- Q5: Changes Made
- Q6: Loggings
The Quick Menu parameters can be accessed immediately
unless a password has been created via
0-60 Main Menu
Password , 0-61 Access to Main Menu w/o Password ,
0-65 Quick Menu Password or 0-66 Access to Quick Menu w/o
Password .
How to Operate the Active F... VLT Active Filter AAF 00x
5-2 MG.90.V2.22 - VLT
®
is a registered Danfoss trademark
5 5