DFX-7
Ultrasonic Flaw Detector
33
Note:
Above will trigger the alarm when a signal meets or exceeds the height
of the gate, and below will detect on anything that meets or is below the height
of the gate.
Set Gate1 Start
1) Press the
UP
and
DOWN
arrow keys until
GATE1
is highlighted, followed by
pressing the
LEFT
and
RIGHT
arrow keys to scroll the value. When the
correct start position is displayed, proceed to the next setting.
2)
Alternatively
, press the
ENTER
key to display the
Digits Edit Box
.
3) Press the
UP
and
DOWN
arrow keys to scroll the highlighted value.
4) Press the
LEFT
and
RIGHT
arrow keys to scroll the digit locations.
5) Repeat steps
3 & 4
until the start position is correctly displayed.
6) Press the
OK
key to set the
GATE1
start position and return to the menu
screen, or
ESC
to cancel entering the
GATE1
start position.
Note:
This where the gate first turn on relative to the horizontal axis or depth.
Sets the left boundary of the gate, or where it turns on.
Set Gate1 Width
1) Press the
UP
and
DOWN
arrow keys until
GATE1 WIDTH
is highlighted,
followed by pressing the
LEFT
and
RIGHT
arrow keys to scroll the value.
When the correct width is displayed, proceed to the next setting.
2)
Alternatively
, press the
ENTER
key to display the
Digits Edit Box
.
3) Press the
UP
and
DOWN
arrow keys to scroll the highlighted value.
4) Press the
LEFT
and
RIGHT
arrow keys to scroll the digit locations.
5) Repeat steps
3 & 4
until the width is correctly displayed.
Содержание DFX-7
Страница 2: ......
Страница 162: ...156 APPENDIX B SETUP LIBRARY Num Name Comment 1 Gn AGC Velocity 1 Enter Custom Name 2 3 4 5 6...