DAKOTA ULTRASONICS DFX-7, Руководство по эксплуатации

Страница: 23 / 163

DFX-7
Ultrasonic Flaw Detector
17
AUTO FIND: Automatically locates the detection point if the measurement is out of
the viewable display area, and automatically sets up the gauges scope settings.
Refer to page 106 for further info.
COMPARE:
Enables the user to freeze and drop a reference reflector or defect into
the background, to compare against a live wave scan in the foreground. Compare is
a variation of the peak feature and used in conjunction with the
PEAK key when
enabled. Refer to page 107 for further info.
SET DATE: Gives the user the ability to set the internal date and time stamp in the
DFX-7
. Refer to page 108 for further info.
SHOW DATE: Gives the user the ability to display the date and time in the waveform
area of the
DFX-7
. The options are OFF, DATE, TIME, BOTH. Refer to page 110 for
further info.
KEY CLICK: Gives the user the ability to set the level of the key press beeper OFF,
QUIET, or LOUD. Refer to page 107 for further info.
GAUGE: Gives the user the ability toggle the
DFX-7
gauge type to either a flaw
detector, or a thickness gauge. Refer to page 3 for further info.
3.16 XFER (transfer) – Menu
UPGRADE GAUGE: Enables the user the ability to upgrade the
DFX-7
to the most
current firmware revision.
ABOUT: Provides the user with Dakota Ultrasonics contact information and the
DFX-7
software version. Refer to the Dakota Ultrasonics web site for information on
the latest firmware versions available for download.
3.17 CLR (clear) Key
The primary functions of the CLR key, is to clear a measurement from a grid or
sequential log files cell location or set obstruct, backspace in an Alpha Edit Box, or
clear a DAC reference point used to generate a curve. Use this key to clear saved
measurement & waveform.
3.18 MEAS (measurement mode) Key