DFX-7
Ultrasonic Flaw Detector
59
2) Press the
LEFT
and
RIGHT
arrow keys to position the start of
GATE1
to
trigger on the waveform.
3) Optionally, press the
MEAS
key multiple times to move right and the
ESC
key multiple times to move left, until the
WIDTH1
cell is highlighted.
4) Press the
LEFT
and
RIGHT
arrow keys to adjust the size or width of
GATE1.
Note:
When the signal is in the gate, the height indicator will detect and display
the % full screen height.
Setting the Level
1) Press the
MEAS
key multiple times to move right and the
ESC
key multiple
times to move left, until the
AWS BOX:
cell is highlighted.
2) Press the
LEFT
and
RIGHT
arrow keys to position the cursor box over the
waveform.
3) Press the
ENTER
key to set the
REFGN
(reference gain).
Note:
This process can be repeated and reset multiple times, or until the
SET
REF GAIN
feature is toggled
OFF
.
4) Press the
MENU
key once to activate the menu items tab. Press the
MENU
key multiple times to tab right, and the
ESC
key multiple times to tab left,
until the
AWS
menu is highlighted and displaying the submenu items.
5) Press the
UP
and
DOWN
arrow keys until
SET REF GAIN
is highlighted,
followed by pressing the
LEFT
and
RIGHT
arrow keys to toggle
OFF
.
6) Finally, press the
MEAS
key to return to the main measurement screen,
followed by pressing the
OK
key to display the
AWS
screen.
Содержание DFX-7
Страница 2: ......
Страница 162: ...156 APPENDIX B SETUP LIBRARY Num Name Comment 1 Gn AGC Velocity 1 Enter Custom Name 2 3 4 5 6...
