DAKOTA ULTRASONICS DFX-7 Скачать руководство пользователя страница 22

Страница: 22 / 163

Dakota Ultrasonics

OPEN:

Displays a list of factory and user defined setups currently stored in memory.

These setups can be recalled and used at any time. Refer to page 141 for further
info.

SAVE:

Provides the user with the ability to save a custom setup that has been

modified or created by the user. Refer to page 143 for further info.

DELETE:

Provides the user with the ability to delete specific setups previously save

in memory. Refer to page 146 for further info.

DEFAULT SETUP:

Loads a basic default setup. Use only as a last resort when the

setups in the

DFX-7

have been corrupted and a computer is not accessible. Refer to

page 148 for further info.

LANGUAGE:

Provides the user the ability to select different languages for the

DFX-

. Refer to page 150 for further info.

3.14 DATA – Menu

NEW:

Allows the user the ability to create a new alpha numeric grid, or sequential

log file with auto identifiers. It is equipped with custom parameters, rows, and
columns depending on the user’s application reporting requirements. Refer to page
117 for further info.

EDIT:

Gives the user the ability to change parameters of grid or sequential file

previously saved. Note: Pre-defined coordinates cannot be changed once they have
been created. Refer to page 135 for further info.

OPEN:

This function provides the user with the ability to recall grids or sequential log

files that currently exist in memory, from a list of grids. Refer to page 137 for further
info.

CLOSE:

Provides the user the ability to close a currently opened grid or sequential

log file. Refer to page 139 for further info.

DELETE ONE FILE:

This function provides the user with the ability to delete one

individual grid or sequential log file from a list of multiple grids/files previously saved
in memory. Refer to page 132 for further info.

DELETE ALL DATA:

This function provides the user with the ability to delete all files

currently stored in memory. Refer to page 133 for further info.

3.15 UTIL (utilities) – Menu

Содержание DFX-7




































































































































































Результаты поиска

Содержание DFX-7

Отзывы:

Похожие инструкции для DFX-7

Бренды по названию

Популярные бренды

DAKOTA ULTRASONICS DFX-7, Руководство по эксплуатации

Результаты поиска

Содержание DFX-7

Отзывы:

Похожие инструкции для DFX-7

Бренды по названию

Популярные бренды