DAKOTA ULTRASONICS DFX-7, Руководство по эксплуатации

Страница: 26 / 163

Dakota Ultrasonics
20
B. Battery Icon – Indicates the amount of battery life the
DFX-7
has remaining.
C. Height – Shows the signal amplitude height as a percent of 100% full screen
height.
D. Feature Status Bar – Indicates the features currently enabled and in use in
the following order:

Feature Toolkits
i. Trig – Trigonometry w/ Curved Surface Correction
ii. AWS – American Welding Society
iii. TCG – Time Corrected Gain
iv. DAC – Distance Amplitude Correction
v. DGS – Distance Gain Size

View
i. RF: Radio Frequency.
ii. R+: Rectified positive.
iii. R- : Rectified negative
iv. FW: Rectified full wave.

Detect
i. Zero crossing (ZX)
ii. Flank (FK)
iii. Peak (PK)

Leg – Skip leg reference, (L1…L4…)

High Speed Scan Mode

Alarm Mode

Gain Setting
E. Leg (skip leg) – Indicates which skip/leg the detection in on. The thickness of
the material is used to calculate the leg.
F. Hot Menu items – We call this menu section our “hot menu”, as these items
are the most commonly adjusted features, requiring quick access from the
user. They can be displayed and scrolled by pressing the
MEAS key at
anytime. The ESC key is used in conjunction with MEAS key to reverse the
direction scrolled.
G. Memory – Indicates that the currently displayed measurement screen and
values have been previous stored in memory. When MEM is displayed, all
measurement functions are disabled until the user advances to an empty
storage location, or the current measurement is cleared by pressing the CLR
key.
H. Height – Displays the amplitude of the signal as a percentage of full screen
height. Depending on the quantity selected, this could also be displayed in
dB, or D.
I. Grid or Seq Log Name – References the name of the log file currently open.