225
GB
Example 2:
three detectors in different zones indicate faults.
Example 3:
a detector, a control device and the same receiver indicate faults.
The receiver memorises the list of events occurring in the system
(intrusion, tamper, etc.). This list can be consulted via the “Read events”
menu. This function is also called the “alarm memory” and can be used
to find out which product has triggered an alarm.
The “list of events” is created in the following cases:
• when the test mode is activated,
• when a tamper alarm is triggered,
• when the system is armed (only when the “system control” function has been configured).
The maximum number of events on the list is 69:
• 64 detector events,
• 4 control device events,
• 1 event for the receiver.
Read Events
>
Others ...
8.5 Consulting the list of events
OK
Fault
>
t
Zone 2 Detec.
01
Battery failure
t
Zone 2 Detec.
01
Radio failure
t
Zone 3 Detec.
28
Battery failure
OK
Fault
< Exit
Fault
>
OK
Fault
>
t
Zone 2 Detec.
01
Battery failure
t
Control
2
Radio failure
t
Module
Power failure
t
Module
Tamper fault
t
Module
Receiver failure
OK
Fault
< Exit
Fault
>
