204
GB
Example 2:
programming two products to be recognised in zone 3:
1.
Select the display menu as shown below:
ƒ
The screen shows confirmation of recognition programming:
Recognit. Zone 3
ack detec. 01
3.
Press the
OK
button. The screen displays:
Detectors recog. >
Zone 3
Recognit. Zone 3
reception wait
ƒ
The screen shows confirmation of recognition programming:
6.
Press the
t
button several times to exit the menu.
Recognit. Zone 3
ack detec. 02
OK
2.
Press the test button on the first product (or the button on the
remote control) until the receiver responds with a confirmation
beep (within 10 seconds max.).
4.
Press the test button on the second product until the receiver
responds with a confirmation beep (within 10 seconds max.).
5.
Press the
OK
button. The screen displays:
Detectors recog. >
Zone 3
)
)
)
)
)
or
or
)
)
)
)
)
or
or
Make a note of the recognition programming performed on the installation sheet at
the back of this manual.
OK
Programming
>
Recognition
OK
Recognition
>
Detectors
t
Detectors recog. >
Auto-recognition
t
Detectors recog. >
Zone 1
t
Detectors recog. >
Zone 2
OK
Detectors recog. >
Zone 3
Recognit. Zone 3
reception wait
