216
GB
1.
Select the menu as shown below in order to identify the relay to be changed:
2.
The screen displays the current configuration.
To change it, press the
OK
button. The screen displays:
Arm Input
Not used
*
3.
Press the
t
button and then
OK
. The screen displays:
Arm Input
Active positive
*
4.
Press
t
to continue and select menu exit.
Example:
to change arm/disarm input operation so that the input detects a positive voltage
(+12V).
The arm/disarm input function can be activated by defining its operating mode. This can be done
via the “Programming” menu, and then the “Conn. Input” sub-menu in “Installation” mode.
5.11 Changing arm/disarm input (ARS) operation
IMPORTANT: the * character at the end of the line indicates the selected parameter in the
current configuration.
IMPORTANT: make sure the DIP1 (ARS) switch 2 setting matches programming.
OK
Installing mode
>
Programming
t
Programming
>
Language select
t
t
t
Programming
>
Recognition
Programming
>
Zone Outputs
Programming
>
Tamper Output
t
Programming
>
Fault Ouput
t
Programming
>
Arm Output
OK
Programming
>
Arm Input
Arm Input
>
Not used
