210
GB
Example:
to change the zone 2 relay factory setting so that the relay is normally open and pulse
activation lasts 8 seconds (NO, MODE3, 8 sec.).
1.
Select the menu as shown below in order to identify the relay to be changed:
2.
The screen displays the current configuration
To change it, press the
OK
button. The screen displays:
Zone Outputs
2
NC (N.Closed)
*
3.
Press the
t
button and then
OK
. The screen displays:
Zone Outputs
2
NO (N.Open)
*
4.
Press
t
3 times and then press
OK
. The screen displays:
Zone Outputs
2
MODE3
*
5.
Press
t
4 times and then press
OK
. The screen displays:
Zone Outputs
2
8sec.
*
6.
Press the
t
button to continue and select menu exit.
It is possible to change the operating mode of
each intrusion output relay via the “Programming”
menu and the “Relay Zones” sub-menu in
“Installation” mode
5.3 Changing intrusion output relay operation (Z1 to Z8)
IMPORTANT: the * character at the end of the line indicates the selected parameter in the
current configuration.
OK
Installing mode
>
Programming
t
Programming
>
Language select
t
OK
t
Programming
>
Recognition
Programming
>
Zone Outputs
Programming
>
Zone Outputs
Zone Outputs
1 >
NC MODE2 2sec.
Zone Outputs
2 >
NC MODE2 2sec.
Installing mode
>
Programming
Programming
>
Language select
Programming
>
Recognition
