Daikin F-Series, Руководство по обслуживанию

Страница: 139 / 355

Instruction SiBE12-713
128 Operation Manual
„
To set the clock
1. Press “CLOCK button”.
is displayed.
blinks.
2. Press “TIMER setting button” to
set the clock to the present time.
Holding down “ ” or “ ” button
rapidly increases or decreases the time
display.
3. Press “CLOCK button”.
blinks.
„
Turn the breaker ON
• Turning ON the breaker opens the flap, then
closes it again. (This is a normal procedure.)
NOTE
„
Tips for saving energy
• Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
• Clogged air filters cause inefficient operation and waste energy. Clean them
once in about every two weeks.
„
Please note
• The air conditioner always consumes 15-35 watts of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker OFF.
• Use the air conditioner in the following conditions.
• Operation outside this humidity or temperature range may cause a safety device to disable the system .
TIMER
ON CANCEL
OFF
1, 3
2
Recommended temperature setting
For cooling:26
°
C – 28
°
C
For heating:20
°
C – 24
°
C
Mode Operating conditions If operation is continued out of this range
COOL Outdoor temperature:
〈
2/3/MXS
〉
–10 to 46
°
C
〈
4/5MK(X)S
〉
–10 to 46
°
C
〈
RK(X)S
〉
–10 to 46
°
C
Indoor temperature: 18 to 32
°
C
Indoor humidity: 80% max.
• A safety device may work to stop the operation.
(In multi system, it may work to stop the operation of the
outdoor unit only.)
• Condensation may occur on the indoor unit and drip.
HEAT Outdoor temperature:
〈
2/3/4/5MXS
〉
–15 to 15.5
°
C
〈
RXS
〉
–15 to 18
°
C
Indoor temperature: 10 to 30
°
C
• A safety device may work to stop the operation.
DRY Outdoor temperature:
〈
2/3/MXS
〉
–10 to 46
°
C
〈
4/5MK(X)S
〉
–10 to 46
°
C
〈
RK(X)S
〉
–10 to 46
°
C
Indoor temperature: 18 to 32
°
C
Indoor humidity: 80% max.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.