Daikin EHVZ04S18EA6V, Руководство по установке для специалистов

Страница: 263 / 272

5/10
Breadcrumb Field code Setting name Range, step
Default value
Date Value
Field settings table Installer setting at variance with
default value
9.3.6 [5-00] R/W 0: No
1: Yes
9.3.7 [5-01] R/W -15~35°C, step: 1°C
0°C
9.3.8 [4-00] R/W 0: Disabled
1: Enabled
2: Only DHW
└─ Booster heater
9.4.1 [6-02] R/W 0~10kW, step: 0,2kW
0
kW
9.4.3 [8-03] R/W 20~95 min, step: 5 min
50 min
9.4.4 [4-03] R/W 0: Restricted
1: Allowed
2: Overlap
3: Compressor off
4: Legionella only
└─ Emergency
9.5.1 [4-06] R/W 0: Manual
1: Automatic(normal SH/DHW ON)
2: Auto red SH/DHW ON
3: Auto red SH/DHW OFF
4: SH ON/DHW OFF
9.5.2 [7-06] R/W 0: Disabled
1: Enabled
└─ Balancing
9.6.1 [5-02] R/W
0: Disabled
1: Enabled
9.6.2 [5-03] R/W -15~35°C, step: 1°C
0°C
9.6.3 [5-04] R/W 0~20°C, step: 1°C
10°C
9.6.4 [8-02] R/W 0~10 hour, step: 0,5 hour
0,5 hour
9.6.5 [8-00] R/W 0~20 min, step 1 min
1 min
9.6.6 [8-01] R/W 5~95 min, step: 5 min
30 min
9.6.7 [8-04] R/W 0~95 min, step: 5 min
95 min
Installer settings
9.7 [4-04] 0: Intermittent
1: Continuous
2: Off
└─ Benefit kWh power supply
9.8.2 [D-00] R/W 0: None
1: BSH only
2: BUH only
3: All heaters
9.8.3 [D-05] R/W 0: Forced off
1: As normal
9.8.4 [D-01] R/W 0: No
1: Active open
2: Active closed
3: Smart grid
9.8.6 0: No
1: Yes
9.8.8 0~20 kW, step: 0,5 kW
20 kW
└─ Power consumption control
9.9.1 [4-08] R/W
0: No limitation
1: Continuous
2: Digital inputs
9.9.2 [4-09] R/W 0: Current
1: Power
9.9.3 [5-05] R/W 0~50 A, step: 1 A
50 A
9.9.4 [5-05] R/W 0~50 A, step: 1 A
50 A
9.9.5 [5-06] R/W 0~50 A, step: 1 A
50 A
9.9.6 [5-07] R/W 0~50 A, step: 1 A
50 A
9.9.7 [5-08] R/W 0~50 A, step: 1 A
50 A
9.9.8 [5-09] R/W 0~20 kW, step: 0,5 kW
20 kW
9.9.9 [5-09] R/W 0~20 kW, step: 0,5 kW
20 kW
9.9.A [5-0A] R/W 0~20 kW, step: 0,5 kW
20 kW
9.9.B [5-0B] R/W 0~20 kW, step: 0,5 kW
20 kW
9.9.C [5-0C] R/W 0~20 kW, step: 0,5 kW
20 kW
9.9.D [4-01] 0: None
1: BSH
2: BUH
└─ Energy metering
9.A.1 [D-08] R/W 0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
9.A.2 [D-09] R/W 0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
└─ Sensors
Equilibrium: Deactivate backup heater (or external backup heat source in case of a
bivalent system) above the equilibrium temperature for space heating?
Equilibrium temperature
Operation
Capacity
BSH eco timer
Operation
Space heating priority
Priority temperature
Offset BSH setpoint
Anti-recycle timer
Emergency
Compressor forced off
Minimum running timer
Maximum running timer
Additional timer
Water pipe freeze prevention
Limit 3
Power consumption control
Type
Limit
Limit 1
Limit 2
Limit 4
Priority heater
Electricity meter 1
Electricity meter 2
Limit 3
Limit 4
Limit
Limit 1
Limit 2
Allow electric heaters
Allow heater
Allow pump
Benefit kWh power supply
Limit setting kW
(*1) *3V_
(*2) *6V_
(*3) *9W
(#) Setting is not applicable for this unit. 4P629095-1A - 2021.02