Dahua IPC-HFW2431T-ZS-S2, Руководство по эксплуатации

Страница: 202 / 247

Table 5-16 Description of people counting parameters
Parameter Description
OSD
Select the OSD check box or select the Enter No. or Leave No. check box
under OSD to display the people counting data in the image.
Click Clear to clear the count.
Flip Set the viewing angle of the image as Inclined or Vertical.
Flowrate Alarm
Set Enter No. , Leave No., and Stranded No. The alarm is triggered when
the configured value is reached.
Regional People
Number Statistics
Alarm
Set the number of people in the people counting region. When the
people count reaches the threshold or the stay duration exceeds the
configured value, the alarm is triggered.
When you set inside number to be 0, and select the type to be ≥
Threshold, the system will not perform the alarm linkage.
Inside Number
Type
Stranding Alarm Select the Stranding Alarm check box, and then set the stranding time,
when the stay duration exceeds the configured value, the alarm will be
triggered.
Stranding Time
Sensitivity
Set the alarm-triggered sensitivity. The higher the sensitivity is, the easier
the alarm will be triggered.
Max Height
Set the maximum height of the people in detection area. The unit is cm,
and the range is 0–300.
Min Height
Set the minimum height of the people in detection area. The unit is cm,
and the range is 0–200.
Step 6 Set arming periods and alarm linkage actions. For details, see "5.1.1 Alarm Linkage".
Step 7 Click Save.
To view alarm information on the Alarm tab, subscribe relevant alarm event. For details,
see "5.1.2 Subscribing Alarm".
Results
You can view the counting results on the Live page.
●
For People Counting rule, the entry and exit numbers are displayed.
●
For In Area No. rule, the inside number is displayed.
Operation Manual
191