Dahua IPC-HFW2431T-ZS-S2, Руководство по эксплуатации

Страница: 192 / 247

●
Batch delete: Select at the upper right corner of the face picture or of the row where the
personnel information is located. Select the information, click Add to Deletion List , ,
and then click OK to delete the selected face picture.
●
Delete all: When viewing face pictures in a list, click of the row where the serial number is
located; when viewing by thumbnail, select All to select all face pictures. Click Add to Deletion
List,
, and then click OK to delete all face pictures.
5.10.2.4 Face Modeling
Face modeling extracts face picture information and imports the information to a database to
establish relevant face feature models. Through this function, the face recognition and other
intelligent detections can be realized.
●
The more the selected face pictures are, the longer time the face modeling takes. Please wait
patiently.
●
During modeling, some intelligent detection functions (such as face recognition) are not
available temporarily, and will be available after modeling.
Procedure
Step 1 Select Setting > Event > Face Recognition > Face Database Config.
The Face Database Config page is displayed.
Step 2 Click next to the face database to be set.
Figure 5-52 Face database configuration
Step 3 Start modeling.
●
Selective modeling.
If there are many face pictures in the face database, you can set search criteria to select
the pictures that need to be modeled.
1. Set the search criteria, and click Search.
2. Select the face pictures to be modeled.
3. Click Modeling.
●
All modeling.
Click Modeling All to complete modeling of all face pictures in the face database.
Step 4 View the modeling result.
●
Successful modeling.
Operation Manual
181