Dahua EVS71 Series, Руководство пользователя

Страница: 69 / 246

User's Manual
52
4.4 People Counting
This Device can count the people flow, in-area people number, and queuing number in the
detection zone.
●
The people counting function is only available with AI by Camera. Make sure that the camera has
been configured with people counting rules.
●
The old people counting data will be overwritten when the storage space runs out. Remember to
back up the data in time.
4.4.1 Enabling the Smart Plan
To use AI by Camera, you need to enable the corresponding smart plan first. For details, see "4.2.1
Enabling the Smart Plan".
4.4.2 Configuring People Counting
The system counts the number of people in and out of the detection area. When the number of
entry, exit or stay reaches the threshold, an alarm is triggered.
Procedure
Step 1 Log in to the PC client.
Step 2 Click on the upper-right corner and then click Event .
You can also click Event from the configuration list on the home page.
Step 3 Select a remote device on the device tree, and then select Smart Plan > People
Counting
>
Rule Config
.
Step 4 Click Add Rule , select People Counting , and then click to enable the function.
Step 5 Draw a people counting zone.
●
Click to draw the detection zone.
●
Click to draw the counting line. The line must be perpendicular to direction of the
people flow.
●
Click to set the whole image as the detection area.
Step 6 Set parameters.
Table 4-6 Parameter description of people counting
Parameter Description
People Counting Alarm Click
Reset
to reset the numbers of entry and exit.
Enter No. Number of people that entered.
Exit No. Number of people that exited.
Stay No.
The number of stay is the result of entry number minus exit
number. An alarm is triggered when the stay number reaches the
threshold.
Step 7 Click Schedule to select a schedule from the drop-down list.