Dahua EVS71 Series, Руководство пользователя

Страница: 141 / 246

User's Manual
124
Among the split NICs that were bonded together, the first NIC reserves the IP address
configured during binding, and the rest NICs restore their default IP addresses.
6.2.1.3 Setting Port Number
Set device port number.
Procedure
Step 1 Log in to the PC client.
Step 2 Click on the upper-right corner and then click
Network
.
You can also click
Network
from the configuration list on the home page.
Step 3 Select Basic Network > Port .
Figure 6-16 Port
Step 4 Configure the parameters.
●
When you log in via TCP, you do not need to log in again to make you changes in max
connection, RTSP port, and UDP port become effective.
●
When you log in by other methods, you need to log in again after you modify the port
parameters except max connection.
Log in again after modifying parameters except Max Connection .
Table 6-7 Port parameters description
Parameter Description
Max Connection
The allowable maximum number of clients accessing the Device at
the same time, such as web, PC client, and platform. Select a value
between 1 and 128. The default value setting is 20.
TCP
Set according to the actual requirements. The default value is 37777.
The value ranges from 1025 to 65535.
RTSP
Set according to the actual requirements. The default value is 554. The
value ranges from 1 to 65535.