xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
D G S – 3 4 2 6 : 5 # c r e a t e i p r o u t e d e f a u l t 1 7 2 . 1 8 . 2 1 2 . 2 5 3 1
C o m m a n d : c r e a t e i p r o u t e d e f a u l t 1 7 2 . 1 8 . 2 1 2 . 2 5 3 1
S u c c e s s .
D G S – 3 4 2 6 : 5 #
D G S – 3 4 2 6 : 5 # # – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
D G S – 3 4 2 6 : 5 # # E n d o f c o n f i g u r a t i o n f i l e f o r D G S – 3 4 2 6
D G S – 3 4 2 6 : 5 #
* * * * * * * * * *
* L o g o u t *
* * * * * * * * * *
NOTE:
With auto-configuration enabled, the Switch IPIF settings now define the Switch
as a DHCP client. Use the
show switch
command to display the new IP settings status.
disable autoconfig
Purpose
Use this to deactivate auto-configuration from DHCP.
Syntax
disable autoconfig
Description
This instructs the Switch not to accept auto-configuration instruction from the DHCP
server. This does not change the IP settings of the Switch. The IPIFsettings will continue
as DHCP client until changed with the
config ipif
command.
Parameters
Only Administrator and Operator-level users can issue this command.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To stop the auto-configuration function:
D G S – 3 4 2 6 : 5 # d i s a b l e a u t o c o n f i g
C o m m a n d : d i s a b l e a u t o c o n f i g
S u c c e s s .
D G S – 3 4 2 6 : 5 #
show autoconfig
Purpose
Used to display the current auto-configuration status of the Switch.
Syntax
show autoconfig
Description
This will list the current status of the auto-configuration function.
Parameters None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To view the auto-configuration status:
64
