xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
100
show multicast filtering_mode
Purpose
Used to show the multicast packet filtering mode as configured for the VLANs.
Syntax
show multicast filtering_mode {vlan <vlan_name 32>}
Description
This command is used to display the current multicast packet filtering mode for specified
VLANs or all VLANs on the Switch.
Parameters
vlan <vlan_name 32>
– Specifies a VLAN to display multicast filtering status.
Restrictions None.
Example usage:
To view the multicast filtering mode for all VLANs:
D G S – 3 4 2 6 : 5 # s h o w m u l t i c a s t f i l t e r i n g _ m o d e
C o m m a n d : s h o w m u l t i c a s t f i l t e r i n g _ m o d e
V L A N N a m e M u l t i c a s t F i l t e r M o d e
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
d e f a u l t f i l t e r _ u n r e g i s t e r e d _ g r o u p s
v 1 f i l t e r _ u n r e g i s t e r e d _ g r o u p s
v 2 f i l t e r _ u n r e g i s t e r e d _ g r o u p s
v 3 f i l t e r _ u n r e g i s t e r e d _ g r o u p s
D G S – 3 4 2 6 : 5 #
show ipfdb
Purpose
Used to display the current IP address forwarding database table.
Syntax
show ipfdb <ipaddr>
Description
This command is used to display the current contents of the Switch’s IP forwarding
database.
Parameters
<ipaddr> –
The user may enter an IP address by which to view the table.
Restrictions None.
Example usage:
To view the IP forwarding database table:
