xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
44
D G S – 3 4 2 6 : 5 # d e l e t e s n m p c o m m u n i t y d l i n k
C o m m a n d : d e l e t e s n m p c o m m u n i t y d l i n k
S u c c e s s .
D G S – 3 4 2 6 : 5 #
show snmp community
Purpose
Used to display SNMP community strings configured on the Switch.
Syntax
show snmp community <community_string 32>
Description
This command is used to display SNMP community strings that are configured on the
Switch.
Parameters
<community_string 32>
−
An alphanumeric string of up to 32 characters that is used to
identify members of an SNMP community. This string is used like a password to give
remote SNMP managers access to MIB objects in the Switch’s SNMP agent.
Restrictions None.
Example usage:
To display the currently entered SNMP community strings:
D G S – 3 4 2 6 P : 4 # s h o w s n m p c o m m u n i t y
C o m m a n d : s h o w s n m p c o m m u n i t y
S N M P C o m m u n i t y T a b l e
C o m m u n i t y N a m e V i e w N a m e A c c e s s R i g h t
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
p r i v a t e C o m m u n i t y V i e w r e a d _ w r i t e
p u b l i c C o m m u n i t y V i e w r e a d _ o n l y
T o t a l E n t r i e s : 2
D G S – 3 4 2 6 P : 4 #
config snmp engineID
Purpose
Used to configure an identification for the SNMP engine on the Switch.
Syntax
config snmp engineID <snmp_engineID 10–64>
Description
This command configures a name for the SNMP engine on the Switch.
Parameters
<snmp_engineID 10–64>
−
An alphanumeric string that will be used to identify the
SNMP engine on the Switch.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To give the SNMP agent on the Switch the name “0035636666”:
D G S – 3 4 2 6 : 5 # c o n f i g s n m p e n g i n e I D 0 0 3 5 6 3 6 6 6 6
C o m m a n d : c o n f i g s n m p e n g i n e I D 0 0 3 5 6 3 6 6 6 6
S u c c e s s .
D G S – 3 4 2 6 : 5 #
