xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
382
show lldp mgt_addr
Purpose
Used to display the LLDP management address information.
Syntax
show lldp mgt_addr {[ipv4 <ipaddr> | ipv6 <ipv6addr>]}
Description
This command is used to displays the LLDP management address information.
Parameters
ipv4
– The IP address of IPv4.
Ipv6
– The IP address of IPv6.
Restrictions None.
Example usage:
To display management address information for port 1:
D G S – 3 4 2 6 : 5 # s h o w l l d p m g t _ a d d r i p v 4 1 9 2 . 1 6 8 . 2 5 4 . 1 0
C o m m a n d : s h o w l l d p m g t _ a d d r i p v 4 1 9 2 . 1 6 8 . 2 5 4 . 1 0
A d d r e s s 1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
S u b t y p e : I P v 4
A d d r e s s : 1 9 2 . 1 6 8 . 2 5 4 . 1 0
I F t y p e : U n k n o w n
O I D : 1 . 3 . 6 . 1 . 4 . 1 . 1 7 1 . 1 0 . 3 6 . 1 . 1 1
A d v e r t i s i n g P o r t s : 1 - 5 , 7
D G S – 3 4 2 6 : 5 #
show lldp ports
Purpose
Display the LLDP per port configuration for advertisement options.
Syntax
show lldp ports {<portlist>}
Description
This command is used to display the LLDP per port configuration for advertisement
options.
Parameters
<portlist>
–
Use this parameter to define ports to be configured.
Restrictions None.
Example usage:
To display the LLDP per port TLV option configuration:
DGS-3426:5#show lldp ports 1
Command: show lldp ports 1:1
Port ID : 1:1
-----------------------------------------------------------------
Admin Status : TX_and_RX
Notification Status : Disabled
Advertised TLVs Option :
Port Description Disabled
System Name Disabled
System Description Disabled
System Capabilities Disabled
Enabled Management Address
(None)
Port VLAN ID Disabled
Enabled Port_and_Protocol_VLAN_ID
(None)
