D-Link xStack DGS-3400 Series, Руководство CLI

Страница: 400 / 462

xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
396
Command Parameters
show dhcp excluded_address
show dhcp pool { <pool_name 12>}
Each command is listed in detail in the following sections.
create dhcp pool
Purpose Used to create a DHCP pool.
Syntax create dhcp pool <pool_name 12>
Description This command is used to create a DCHP pool for the DHCP server. Once created, this
pool may be modified for accepting DHCP clients into this pool.
Parameters
<pool_name 12>
−
Enter an name of up to 12 alphanumeric characters to identify the
pool to be created with this command.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To create the DHCP pool Floor2:
D G S - 3 4 2 6 : 5 # c r e a t e d h c p p o o l F l o o r 2
C o m m a n d : c r e a t e d h c p p o o l F l o o r 2
S u c c e s s .
D G S - 3 4 2 6 : 5 #
delete dhcp pool
Purpose Used to delete a DHCP pool.
Syntax
delete dhcp pool {<pool_name 12> | all}
Description This command is used to delete a DHCP poll that was created with the create dhcp pool
command.
Parameters
<pool_name 12>
−
Enter an name of up to 12 alphanumeric characters to identify the
pool to be deleted with this command.
all – Enter this command to delete all created DHCP pool.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To delete the DHCP pool Floor2:
D G S - 3 4 2 6 : 5 # d e l e t e d h c p p o o l F l o o r 2
C o m m a n d : d e l e t e d h c p p o o l F l o o r 2
S u c c e s s .
D G S - 3 4 2 6 : 5 #