xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
241
config dst
Parameters
e_date
– Configure the specific date (day of the month) to begin DST.
•
<end_date 1–31>
– The end date is expressed numerically.
offset [30 | 60 | 90 | 120]
– Indicates number of minutes to add or to subtract during the
summertime. The possible offset times are 30,60,90,120. The default value is 60.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure daylight savings time on the Switch:
D G S – 3 4 2 6 : 5 # c o n f i g d s t r e p e a t i n g s _ w e e k 2 s _ d a y t u e s _ m t h 4 s _ t i m e 1 5 : 0 0 e _ w e e k 2
e _ d a y w e d e _ m t h 1 0 e _ t i m e 1 5 : 3 0 o f f s e t 3 0
C o m m a n d : c o n f i g d s t r e p e a t i n g s _ w e e k 2 s _ d a y t u e s _ m t h 4 s _ t i m e 1 5 : 0 0 e _ w e e k 2
e _ d a y w e d e _ m t h 1 0 e _ t i m e 1 5 : 3 0 o f f s e t 3 0
S u c c e s s .
D G S – 3 4 2 6 : 5 #
show time
Purpose
Used to display the current time settings and status.
Syntax
show time
Description
This command is used to display system time and date configuration as well as display
current system time.
Parameters None.
Restrictions None.
Example usage:
To display the time currently set on the Switch’s System clock:
D G S – 3 4 2 6 : 5 # s h o w t i m e
C o m m a n d : s h o w t i m e
C u r r e n t T i m e S o u r c e : S y s t e m C l o c k
B o o t T i m e : 4 M a y 2 0 0 6 1 0 : 2 1 : 2 2
C u r r e n t T i m e : 4 M a y 2 0 0 6 1 5 : 0 1 : 3 2
T i m e Z o n e : G M T + 0 2 : 3 0
D a y l i g h t S a v i n g T i m e : R e p e a t i n g
O f f s e t i n M i n u t e s : 3 0
R e p e a t i n g F r o m : A p r 2 n d T u e 1 5 : 0 0
T o : O c t 2 n d W e d 1 5 : 3 0
A n n u a l F r o m : 2 9 A p r 0 0 : 0 0
T o : 1 2 O c t 0 0 : 0 0
D G S – 3 4 2 6 : 5 #
