D-Link xStack DGS-3400 Series, Руководство CLI

Страница: 270 / 462

xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
config authen_login
Parameters the TACACS protocol from the remote TACACS server hosts of the TACACS
server group list.
ƒ
xtacacs – Adding this parameter will require the user to be authenticated using
the XTACACS protocol from the remote XTACACS server hosts of the
XTACACS server group list.
ƒ
– Adding this parameter will require the user to be authenticated using
the protocol from the remote server hosts of the
server group list.
ƒ
radius – Adding this parameter will require the user to be authenticated using the
RADIUS protocol from the remote RADIUS server hosts of the RADIUS server
group list.
ƒ
server_group <string 15> – Adding this parameter will require the user to be
authenticated using a user–defined server group previously configured on the
Switch.
ƒ
local – Adding this parameter will require the user to be authenticated using the
local user account database on the Switch.
ƒ
none – Adding this parameter will require no authentication to access the
Switch.
method_list_name – Enter a previously implemented method list name defined by the
user. The user may add one, or a combination of up to four of the following authentication
methods to this method list:
ƒ
tacacs – Adding this parameter will require the user to be authenticated using
the TACACS protocol from a remote TACACS server.
ƒ
xtacacs – Adding this parameter will require the user to be authenticated using
the XTACACS protocol from a remote XTACACS server.
ƒ
– Adding this parameter will require the user to be authenticated using
the protocol from a remote server.
ƒ
radius – Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
ƒ
server_group <string 15> – Adding this parameter will require the user to be
authenticated using a user–defined server group previously configured on the
Switch.
ƒ
local – Adding this parameter will require the user to be authenticated using the
local user account database on the Switch.
ƒ
none – Adding this parameter will require no authentication to access the
Switch.
NOTE:
Entering none or local as an authentication protocol will override
any other authentication that follows it on a method list or on the default
method list.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the user defined method list “Tiberius” with authentication methods tacacs, xtacacs and local, in that order.
D G S – 3 4 2 6 : 5 # c o n f i g a u t h e n _ l o g i n m e t h o d _ l i s t _ n a m e T i b e r i u s m e t h o d t a c a c s x t a c a c s
l o c a l
C o m m a n d : c o n f i g a u t h e n _ l o g i n m e t h o d _ l i s t _ n a m e T i b e r i u s m e t h o d t a c a c s x t a c a c s
l o c a l
S u c c e s s .
D G S – 3 4 2 6 : 5 #
Example usage:
To configure the default method list with authentication methods xtacacs, and local, in that order:
266