D-Link DKVM-IP8, Руководство пользователя

Страница: 87 / 104

DKVM-IP8 User Manual
87 / 104
Serial line speed
The speed the DKVM-IP8 is communicating with the modem. Most of all
modems available today will support the default value of 115200 bps. In case
you are using an old modem and discovering problems try to lower this speed.
Modem Init String
The initialization string used by the DKVM-IP8 to initialize the modem. The
default value will work with all modern standard modems directly connected to
a telephone line. In case you have a special modem or the modem is
connected to a local telephone switch that requires a special dial sequence in
order to establish a connection to the public telephone network, you can
change this setting by giving a new string. Refer to the modem's manual about
the AT command syntax.
Modem server IP address
This IP address will be assigned to the DKVM-IP8 itself during the PPP
handshake. Since it is a point-to-point IP connection virtually every IP address
is possible but you must make sure, it is not interfering with the IP settings of
the DKVM-IP8 and your console computer. The default value will work in most
cases.
Modem client IP address
This IP address will be assigned to your console computer during the PPP
handshake. Since it is a point-to-point IP connection virtually every IP address
is possible but you must make sure, it is not interfering with the IP settings of
the DKVM-IP8 and your console computer. The default value will work in most
cases.
Passthrough access to serial port via Telnet
Using this option, it is possible to connect an arbitrary device to the serial port and
access it (assuming it provides terminal support) via Telnet. Select the appropriate
options for the serial port and use the Telnet Console, or a standard Telnet client to
connect to the DKVM-IP8.
IP-Power (Power Control Settings)
For controlling Serial Power Controller.