D-Link DGS-3212SR, Справочное руководство по интерфейсу командной строки

Страница: 193 / 269

DGS-3212SR Layer 3 Gigabit Switch
DGS-3212SR:4#show ssh authmode
Command: show ssh authmode
The SSH authmode
Hostbased : Enable
Password : Enable
Publickey : Enable
DGS-3212SR:4#
config ssh server
Purpose Used to configure the SSH server.
Syntax
config ssh server {maxsession <int 1-8> | contimeout <sec 120-
600> | authfail <int 2-20> | rekey [10min | 30min | 60min | never] |
port <tcp_port_number 1-65535>}
Description This command allows you to configure the SSH server.
Parameters maxsession <int 1-8> - Allows the user to set the number of users
that may simultaneously access the switch. The default is 8.
contimeout <sec 120-600> - Allows the user to set the connection
timeout. The user may set a time between 120 and 600 seconds.
The default is 300 seconds.
authfail <int 2-20> - Allows the administrator to set the maximum
number of attempts that a user may try to log on utilizing SSH
authentication. After the maximum number of attempts is exceeded,
the switch will be disconnected and the user must reconnect to the
switch to attempt another login.
rekey [10min | 30min | 60min | never] - Sets the time period that the
switch will change the security shell encryptions.
port <tcp_port_number 1-65535> - Enter the TCP port number
associated with this function. The default TCP port number for SSH
is 22.
Restrictions Only administrator-level users can issue this command.
Usage Example:
To configure the SSH server:
DGS-3212SR:4# config ssh server maxsession 2 contimeout 300 authfail 2
Command: config ssh server maxsession 2 contimeout 300 authfail 2
Success.
181