D-Link DGS-3212SR, Справочное руководство по интерфейсу командной строки

Страница: 251 / 269

DGS-3212SR Layer 3 Gigabit Switch
config time
Purpose Used to manually configure system time and date settings.
Syntax config time date <date ddmmmyyyy> <time hh:mm:ss>
Description This will configure the system time and date settings. These will
be overridden if SNTP is configured and enabled.
date – Express the date using two numerical characters for the
day of the month, three alphabetical characters for the name of
the month, and four numerical characters for the year. For
example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is,
two numerical characters each for the hour using a 24-hour clock,
the minute and second. For example: 19:42:30.
Restrictions Only administrator-level users can issue this command. Manually
configured system time and date settings are overridden if SNTP
support is enabled.
Parameters
Example usage:
To manually set system time and date settings:
DGS-3212SR:4#config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DGS-3212SR:4#
config time zone
Purpose Used to determine the time zone used in order to adjust the
system clock.
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> |
min <minute 0-59>}
Description This will adjust system clock settings according to the time zone.
Time zone settings will adjust SNTP information accordingly.
Parameters operator – Choose to add (+) or subtract (-) time to adjust for time
zone relative to GMT.
hour – Select the number hours different from GMT.
min – Select the number of minutes difference added or
subtracted to adjust the time zone.
Restrictions Only administrator-level users can issue this command.
Syntax
Example usage:
239