D-Link DGS-3212SR, Справочное руководство по интерфейсу командной строки

Страница: 38 / 269

DGS-3212SR Layer 3 Gigabit Switch
config ports
[master | slave] – The master and slave parameters refer to
connections running a 1000BASE-T cable for connection between
the Switch port and other device capable of a gigabit connection.
The
master setting will allow the port to advertise capabilities
related to duplex, speed and physical layer type. The master
setting will also determine the master and slave relationship
between the two connected physical layers. This relationship is
necessary for establishing the timing control between the two
physical layers. The timing control is set on a
master physical
layer by a local source. The slave setting uses loop timing, where
the timing comes form a data stream received from the master . If
one connection is set for 1000 master , the other side of the
connection must be set for 1000 slave . Any other configuration will
result in a link down status for both ports.
flow_control [enable | disable] – Enable or disable flow control for
the specified ports.
learning [enable | disable]
−
Enables or disables the MAC address
learning on the specified range of ports.
state [enable | disable]
−
Enables or disables the specified range
of ports.
description <desc 32> - Enter an alphanumeric string of no more
than 32 characters to describe a selected port interface.
26