D-Link DGS-3212SR, Справочное руководство по интерфейсу командной строки

Страница: 43 / 269

DGS-3212SR Layer 3 Gigabit Switch
DGS-3212SR:4#show port_security ports
Command: show port_security ports
Port# Admin State Max. Learning Addr. Lock Address Mode
---- ----------- ------------------- -----------------
15:1 Disabled 1 DeleteOnReset
15:2 Disabled 1 DeleteOnReset
15:3 Disabled 1 DeleteOnReset
15:4 Disabled 1 DeleteOnReset
15:5 Disabled 1 DeleteOnReset
15:6 Disabled 1 DeleteOnReset
15:7 Enabled 10 DeleteOnReset
15:8 Disabled 1 DeleteOnReset
15:9 Disabled 1 DeleteOnReset
15:10 Disabled 1 DeleteOnReset
15:11 Disabled 1 DeleteOnReset
15:12 Disabled 1 DeleteOnReset
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
delete port_security_entry vlan_name
Purpose
Used to delete an entry from the switch’s port security settings.
Syntax delete port_security_entry vlan_name <vlan_name 32>
mac_address <macaddr> port <port>
Description This command is used to remove an entry from the port security
entries learned by the switch and entered into the forwarding
database.
Parameters
<vlan_name 32> - Enter the corresponding vlan of the entry the user
wishes to delete.
mac_address <macaddr> - Enter the corresponding MAC address of
the entry the user wishes to delete.
port <port> - Enter the corresponding port of the entry to delete. The
port list is specified by listing the lowest switch number and the
beginning port number on that switch, separated by a colon. Then
the highest switch number, and the highest port number of the range
(also separated by a colon) are specified. The beginning and end of
the port list range are separated by a dash. For example, 1:3
specifies switch number 1, port 3. 2:4 specifies switch number 2,
port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and
switch 2, port 4
−
in numerical order.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete an entry from the port security list:
31