D-Link DGS-3212SR, Справочное руководство по интерфейсу командной строки

Страница: 261 / 269

DGS-3212SR Layer 3 Gigabit Switch
31
R
OUTING
T
ABLE
C
OMMANDS
The routing table commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create iproute default <ipaddr> {<metric 1-65535>}
show iproute {<network_address>} {static}
delete iproute default
Each command is listed, in detail, in the following sections.
create iproute default
Purpose Used to create IP route entries to the switch’s IP routing table.
Syntax
create iproute default <ipaddr> {<metric>}
This command is used to create a default static IP route entry to the
switch’s IP routing table.
<ipaddr>
−
The gateway IP address for the next hop router.
<metric>
−
Allows the entry of a routing protocol metric entry
representing the number of routers between the Switch and the IP
address above. The default setting is 1.
Restrictions Only administrator-level users can issue this command.
Description
Parameters
Example Usage:
To add the default static address 10.48.74.121, with a metric setting of 1, to the routing table:
DGS-3212SR:4#create iproute default 10.48.74.121 1
Success.
Command: create iproute default 10.48.74.121 1
DGS-3212SR:4#
delete iproute default
Purpose Used to delete a default IP route entry from the switch’s IP routing
table.
Syntax delete iproute default
Description This command will delete an existing default entry from the
switch’s IP routing table
249