D-Link DGS-3212SR, Справочное руководство по интерфейсу командной строки

Страница: 178 / 269

DGS-3212SR Layer 3 Gigabit Switch
Example usage:
To display the login and enable method list for all applications on the switch:
DGS-3212SR:4#show authen application
Command: show authen application
Application Login Method List Enable Method List
Telnet Trinity default
---------------- ------------------ ------------------------
Console default default
SSH default default
HTTP default default
DGS-3212SR:4#
create authen server_host
Used to create an authentication server host.
Syntax create authen server_host <ipaddr> protocol [tacacs | xtacacs
| | radius] {port <int 1-65535> | key [<key_string 254> |
none] | timeout <int 1-255> | retransmit <1-255>}
Description This command will create an authentication server host for the
TACACS/XTACACS//RADIUS security protocols on the
switch. When a user attempts to access the switch with
authentication protocol enabled, the switch will send authentication
packets to a remote TACACS/XTACACS//RADIUS
server host on a remote host. The
TACACS/XTACACS//RADIUS server host will then verify
or deny the request and return the appropriate message to the
switch. More than one authentication protocol can be run on the
same physical server host but, remember that
TACACS/XTACACS//RADIUS are separate entities and
are not compatible with each other. The maximum supported
number of server hosts is 16.
Parameters server_host <ipaddr> - The IP address of the remote server host
the user wishes to add.
protocol – The protocol used by the server host. The user may
choose one of the following:
Purpose
tacacs – Enter this parameter if the server host utilizes the
TACACS protocol.
xtacacs - Enter this parameter if the server host utilizes the
XTACACS protocol.
- Enter this parameter if the server host utilizes
the protocol.
166