D-Link DES-3028, Руководство пользователя

Страница: 225 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Parameter Description
From and To Select ports to be initialized.
Auth PAE State
The Authenticator PAE State will display one of the following:
Initialize, Disconnected,
Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth,
and
N/A.
Backend State The Backend Authentication State will display one of the following:
Request, Response,
Success, Fail, Timeout, Idle, Initialize,
and
N/A.
Oper Dir The status of the administrative-controlled direction, either
In
or
Both.
Port Status
A read-only field indicating a port on the Switch.
Initializing Ports for Host Based 802.1X
To initialize ports for the Host side of 802.1X, the user must first enable 802.1X by MAC address in the
DES-30xx Web
Management Tool
window. Click
Security > 802.1X > Initialize Port(s)
to open the following window:
Figure 10- 29. Initialize Ports (Host based 802.1X)
To initialize ports, choose the range of ports in the
From
and
To
field. Then the user must specify the MAC address to be
initialized by entering it into the
MAC Address
field and checking the corresponding check box. To begin the initialization, click
Apply
.
NOTE: The user must first globally enable 802.1X in the DES-30xx Web
Management Tool window before initializing ports. Information in the
Initialize Ports Table cannot be viewed before enabling 802.1X.
211