D-Link DES-3028, Руководство пользователя

Страница: 77 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Figure 6- 39. SNMP Community Table Configuration window
The following parameters can set:
Parameter Description
Community Name Type an alphanumeric string of up to 32 characters that is used to identify members of an
SNMP community. This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
View Name Type an alphanumeric string of up to 32 characters that is used to identify the group of MIB
objects that a remote SNMP manager is allowed to access on the Switch. The view name
must exist in the SNMP View Table.
Access Right
Read Only
- Specifies that SNMP community members using the community string created
can only read the contents of the MIBs on the Switch.
Read Write
- Specifies that SNMP community members using the community string created
can read from, and write to the contents of the MIBs on the Switch.
To implement the new settings, click
Apply
. To delete an entry from the
SNMP Community Table
, click the corresponding
under the Delete heading.
SNMP Host Table
Figure 6- 40. SNMP Host Table window
Use the
SNMP Host Table
window to set up
SNMP trap recipients. To view this window, click
Administration
>
SNMP Manager
>
SNMP
Host Table
. This will open the
SNMP Host
Table
window, as shown to the right. To delete
an existing SNMP Host Table entry, click the
corresponding under the Delete heading. To
display the current settings for an existing
SNMP
Host Table
entry, click the blue link for the entry
under the Host IP Address heading.
To add a new entry to the Switch's SNMP Host
Table, click the
Add
button in the upper left-hand
corner of the window. This will open the
SNMP
Host Table Configuration
window, as shown to
the right.
Figure 6- 41. SNMP Host Table Configuration window
63