D-Link DES-3028, Руководство пользователя

Страница: 183 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
CPU Interface Filtering
Due to a chipset limitation and the need for extra switch security, the DES-30xx switch series incorporates CPU Interface filtering.
This added feature increases the running security of the Switch by enabling the user to create a list of access rules for packets
destined for the Switch’s CPU interface. Employed similarly to the Access Profile feature previously mentioned, CPU interface
filtering examines Ethernet, IP and Packet Content Mask packet headers destined for the CPU and will either forward them or
filter them, based on the user’s implementation. As an added feature for the CPU Filtering, the Switch allows the CPU filtering
mechanism to be enabled or disabled globally, permitting the user to create various lists of rules without immediately enabling
them.
Creating an access profile for the CPU is divided into two basic parts. The first is to specify which part or parts of a frame the
Switch will examine, such as the MAC source address or the IP destination address. The second part is entering the criteria the
Switch will use to determine what to do with the frame. The entire process is described below.
CPU Interface Filtering State
In the following window, the user may globally enable or disable the CPU Interface Filtering mechanism by using the pull-down
menu to change the running state. To access this window, click
ACL > CPU Interface Filtering > CPU Interface Filtering
State
. Choose Enabled to enable CPU packets to be scrutinized by the Switch and Disabled to disallow this scrutiny.
Figure 9- 15. CPU Interface Filtering State window
CPU Interface Filtering Profile Table
Click
ACL
>
CPU Interface Filtering
>
CPU Interface Filtering Table
to display the CPU Access Profile Table entries created
on the Switch. To view the configurations for an entry, click the hyperlinked
Profile ID
number.
Figure 9- 16. CPU Interface Filtering Table window
To add an entry to the
CPU Interface Filtering Profile Table
window, click the
Add
button. This will open the
CPU Interface
Filtering Profile Configuration
window, as shown below. There are three
CPU Access Profile Configuration
windows; one for
Ethernet
(or MAC address-based) profile configuration, one for
IP
address-based profile configuration and one for the
Packet
Content Mask
. Users can switch between the three
CPU Access Profile Configuration
windows by using the
Type
drop-down
menu. The window shown below is for
Ethernet CPU Interface Filtering Configuration
.
169