D-Link DES-3028 страница 319 Скачать руководство пользователя

Страница: 319 / 333

Tech Support

Technical Support

You can find software updates and user documentation on the D-Link website.

D-Link provides free technical support for customers within the United States and

within Canada for the duration of the service period, and warranty confirmation

service, during the warranty period on this product. U.S. and Canadian

customers can contact D-Link technical support through our website, or by

phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

USA - 877-DLINK-55 (877-354-6555)

D-Link Technical Support over the Internet:

http://support.dlink.com

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

877-354-6560

D-Link Technical Support over the Internet:

http://support.dlink.com

Содержание DES-3028













































































































































































































































































































































Результаты поиска

Содержание DES-3028

Отзывы:

Похожие инструкции для DES-3028

Бренды по названию

Популярные бренды

D-Link DES-3028, Руководство пользователя

Результаты поиска

Содержание DES-3028

Отзывы:

Похожие инструкции для DES-3028

Бренды по названию

Популярные бренды