D-Link DES-3028, Руководство пользователя

Страница: 239 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Configure Local Enable Password
This window will configure the locally enabled password for the Enable Admin command. When a user chooses the
"local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the
password configured here that is locally set on the Switch.
To view the following window, click
Security > Access Authentication Control > Configure Local Enable Password
:
Figure 10- 48. Configure Local Enable Password window
To set the Local Enable Password, set the following parameters and click
Apply
.
Parameter Description
Old Local Enabled
If a password was previously configured for this entry, enter it here in order to change it to
a new password
New Local Enabled Enter the new password that you wish to set on the Switch to authenticate users
attempting to access Administrator Level privileges on the Switch. The user may set a
password of up to 15 characters.
Confirm Local Enabled Confirm the new password entered above. Entering a different password here from the
one set in the New Local Enabled field will result in a fail message.
Enable Admin
Figure 10- 49. Enable Admin window
The
Enable Admin
window is for users who have
logged on to the Switch on the normal user level, and
wish to be promoted to the administrator level. After
logging on to the Switch, users will have only user level
privileges. To gain access to administrator level
privileges, the user will open this window and will have
to enter an authentication password. Possible
authentication methods for this function include
TACACS/XTACACS//RADIUS, user
defined server groups, local enable (local account on
the Switch), or no authentication (none). Because
XTACACS and TACACS do not support the enable
function, the user must create a special account on the
server host, which has the username "enable", and a
password configured by the administrator that will
support the "enable" function. This function becomes
inoperable when the authentication policy is disabled.
When this window appears, click the
Enable Admin
button revealing a dialog box for the user to enter
authentication (password, username), as seen below. A
successful entry will promote the user to Administrator
level privileges on the Switch.
To view the following window, click
Security > Access
Authentication Control > Enable Admin
:
Figure 10- 50. Enter Network Password dialog box
225