D-Link DES-3028, Руководство пользователя

Страница: 173 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch
Ethernet Type Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
The window shown below is the
Access Profile Configuration
window for IP.
Figure 9- 4. Access Profile Configuration window (IP)
The following parameters can be set, for IP:
Parameter Description
Profile ID (1-256) Type in a unique identifier number for this profile set. The number is used to set the relative
priority for the profile. Priority is set relative to other profiles where the lowest profile ID has the
highest priority. If a conflict occurs among configured access rules, the profile ID establishes
relative priority of the rules. The value can be set from
1
to
256
however there is a limit to the
total number of profiles that can be created.
Type Select profile based on Ethernet (MAC Address), IP address or packet content mask. This will
change the menu according to the requirements for the type of profile.

Select
Ethernet
to instruct the Switch to examine the layer 2 part of each packet
header.

Select
IP
to instruct the Switch to examine the IP address in each frame's header.

Select
Packet Content Mask
to specify a mask to hide the content of the packet
header.
VLAN Selecting this option instructs the Switch to examine the VLAN part of each packet header and
use this as the, or part of the criterion for forwarding.
Source IP Mask Enter an IP address mask for the source IP address.
159