D-Link DES-3028 Скачать руководство пользователя страница 224

Страница: 224 / 333

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch

Figure 10- 27. Configure 802.1X Guest VLAN window

The following fields may be modified to enable the guest 802.1X VLAN:

Parameter Description

VLAN Name

Enter the pre-configured VLAN name to create as a Guest 802.1X VLAN.

Operation

The user has two choices in configuring the Guest 802.1X VLAN, which are:

Enabled

– Selecting this option will enable ports listed in the Port List below, as part of the Guest

VLAN. Be sure that these ports are configured for this VLAN or users will be prompted with an
error message.

Disabled

- Selecting this option will disable ports listed in the Port List below, as part of the

Guest VLAN. Be sure that these ports are configured for this VLAN or users will be prompted
with an error message.

Port List

Set the port list of ports to be enabled for the Guest 802.1X VLAN using the pull-down menus.

Click

Apply

to implement the guest 802.1X VLAN settings entered. Only one VLAN may be assigned as the 802.1X Guest

VLAN.

Initializing Ports for Port Based 802.1X

Existing 802.1X port and MAC settings are displayed and can be configured using the window below.

Click

Security > 802.1X > Initialize Port(s)

to open the following window:

Figure 10- 28. Initialize Port window

This window allows initialization of a port or group of ports. The

Initialize Port Table

in the bottom half of the window displays

the current status of the port(s).

This window displays the following information:

210

Содержание DES-3028













































































































































































































































































































































Результаты поиска

Содержание DES-3028

Отзывы:

Бренды по названию

Популярные бренды

D-Link DES-3028, Руководство пользователя

Результаты поиска

Содержание DES-3028

Отзывы:

Бренды по названию

Популярные бренды