Czech Aircraft CRUISER AIRCRAFT PS-28 Cruiser 2021, Руководство по обслуживанию

Страница: 23 / 362

CR-MM-1-0-00
PS-28 Cruiser
PS-28N Cruiser
CHAPTER 1 – GENERAL
Date of issue: 2011-07-08 Revision No.: 1
1 - 9
1.13 General Safety Information
Safety must be considered the first priority when performing maintenance or service on an
aircraft or part. To minimize the risk to both yourself and others, begin by thinking through each
task that is to be performed before starting any work. Using common sense, think of ways to
avoid these hazards. Be sure to also use the right tool for the task at hand and to use the proper
personal protective equipment. Such equipment may include, but is not limited to:
•
Eye protection – safety glasses, goggles, and face shield
•
Gloves
•
Hearing protection – ear plugs or muffs
•
Apron
•
Protective footwear with non-slip soles
Some other general rules to follow are:
•
Prior to performing maintenance or repair always disconnect the negative (-) battery cable
from the battery.
•
During all service and repair work beware of activating the BRS rocket (if installed).
•
Never leave the ignition switch or the master switch turned on when the engine is not
running. While running the engine on the ground, keep away from the propeller.
•
Remove any loose clothing, such as neckties and scarves. Tuck in your shirt and secure
any long hair to prevent them from becoming tangled in power tools.
•
Remove all jewelry. Not only can items such as rings, watches, and necklaces become
caught in rotating tools, they can also conduct electricity and may cause a short circuit. This
could result in burns or damage to electrical circuits.
•
Aviation gasoline is also highly flammable. When working with the fuel system, always work
in a well-ventilated environment. Any nearby source of ignition such as sparks or an open
flame can result in a fire or explosion. Keep all ignition sources away. Always ground the
airframe to a suitable earth ground during fueling/defueling operations to reduce the risk of
a static discharge ignition source.
•
When working with the landing gear, always support the aircraft properly with jacks. Do not
work underneath the aircraft unless it is properly supported.