cytiva Sterile Tube Fuser, Руководство по эксплуатации

Страница: 69 / 116

6.3 Regular maintenance of Sterile Tube Fuser - Dry
The following list describes general user maintenance activities.
•
Replace the fuse in case of fuse failure. See Section 6.5 Replacement of fuses, on
page 82 for more information.
•
Handle and store the tube holders in a safe designated place. Dropping the holders
on the pin side could cause damage to holder and result in poor fit.
•
Before use, check whether the code plate underneath the left tube holder is intact.
•
Tighten the captive screw, if the installed tube holders are found to be slack.
•
Clean the instrument surface, welding region, and tube holders from any liquid
spillage after tube welding operation.
•
Perform safety checks on instrument and surroundings at regular intervals, once in
a quarter for safe operating conditions.
•
Contact Service to schedule the instrument for preventive maintenance by Cytiva
service personnel.
All other maintenance tasks on Sterile Tube Fuser - Dry and Hot Lips Tube Sealer must
be performed by a Cytiva Service representative.
6 Maintenance
6.3 Regular maintenance of Sterile Tube Fuser - Dry
Sterile Tube Fuser - Dry and Hot Lips Tube Sealer Operating Instructions 28964139 AG 69