2.3
Emergency procedures
Introduction
This section describes how to shut down the Sterile Tube Fuser - Dry and Hot Lips Tube
Sealer instruments in an emergency situation. The section also describes the result in
the event of power failure.
Emergency shutdown of Sterile Tube
Fuser - Dry
Switch off the power by pressing the power switch to the "
O" position.
The power switch is located at the rear of the instrument, see the illustration below.
Disconnect the power cord from the power outlet.
2 Safety instructions
2.3 Emergency procedures
24
Sterile Tube Fuser - Dry and Hot Lips Tube Sealer Operating Instructions 28964139 AG
