CYPRES 2 Скачать руководство пользователя страница 16

Страница: 16 / 72

page 16

- CYPRES 2 User’s Guide -

2.6 Wing Suit CYPRES (WSC)

The WSC can be recognized by the red button with

the white Wing Suit Logo imprint on the control

unit.

As long as the WSC works in Wing Suit Status, it

activates the release unit at a vertical speed higher

than approx. 45 mph (20 m/s) at an altitude of approx

750 feet (approx 225 meters) above ground level and

down to approx. 130 feet (40 meters).

If between the altitude of approx. 6500 feet (2000

meters) and approx. 1500 feet (450 meters) above

ground level the WSC descends with less than

approx 19 mph (8.5 m/s) but more than 5.6 mph

(2.5 m/s) for more than 10 seconds (this duration

can be altered. See chapter 4.4.6), then the WSC

changes to Canopy Status with different activation

criteria. Thereafter it will activate the release unit

at approx. 750 feet (225 meters) and down to ap-

prox. 130 feet (40 meters) above ground level if

the vertical speed is higher than approx. 78 mph

(35 m/s). This is the Expert mode and the WSC

default setting.

In the case that the WSC has been set to use the

Speed mode instead of the Expert mode, then it will

activate the release unit at an altitude of approx. 750

feet (225 meters) and down to approx. 330 feet (100

meters) above ground level, if the vertical speed is

higher than approx. 102 mph (46 m/s).

The WSC System consists of the WSC unit and

the WSC Audio.

WSC unit and Audio are paired, only these two

will function together. Both items carry the same

serial number.

There are materials which possibly may impede or

prevent radio waves. Please ensure that your hel-

met is not made out of those. Feel free to contact us.

Содержание 2









































































Результаты поиска

Содержание 2

Отзывы:

Похожие инструкции для 2

Бренды по названию

Популярные бренды

CYPRES 2, Руководство пользователя

Результаты поиска

Содержание 2

Отзывы:

Похожие инструкции для 2

Бренды по названию

Популярные бренды