CYPRES 2, Руководство пользователя

Страница: 34 / 72

page 34 - CYPRES 2 User’s Guide -
Any adjustment solely on the user‘s risk. Inappropriate
settings can cause injury or death.
4.4.6 WSC: Changing the setting for status
change
The WSC changes from WS Status to Canopy
status if the vertical speed at an altitude between
6500 feet (2000 meters) and 1500 feet (450 meters)
ranges between 2.5 m/s and 8,5 m/s for a dura-
tion of 10 seconds. This duration can be altered
by the user.
It is selectable from 6 seconds to 20 seconds. The
needed procedure is the same as with seting a user
selectable activation altitude. (see chapter 4.4.3)
The default setting 10 seconds seems to be the
appropriate setting. Please do not alter this unless
there is a very valid reason and you have 100%
understood and are fully aware about every techni-
cal circumstances and physical details concerning
all aspects of Wing Suiting and the Wing Suit
CYPRES and all consequences of any actions.
The reason to have this value selectable is to al-
low for upcoming developments in the discipline.
It should only be used very, very carefully and
solely very wise.
4.5 Access to unit information
CYPRES 2 provides an easy way to view / select
1. the flight counter,
2. the unit’s serial number,
3. the next possible maintenance date*
4. the scale meter or feet
5. the user selected activation altitude
6. Wing Suit CYPRES canopy status Expert
or Speed
7. Wing Suit CYPRES time duration for
status change
To view the unit informations press the button
immediately when the appears at the end
of the switch-on procedure and hold it.
Each value is displayed for 5 seconds, then the
next value shows up.
You can stop the information sequence whenever
you want by just releasing the button.
* After the last scheduled maintenance has been
performed, the words ‘maint. no’ and the date of
the end of service life is shown.