Cybernetics miSAN-V6, Руководство оператора

Страница: 83 / 190

83 Operating the Web Control Panel
Cybernetics UM-MV-86-B1-0801
• Tape – Tapes inserted in the physical library slots and drive(s)
All control and jobs for the physical stacker are initiated using commands avail-
able from a popup menu. To access the popup menu, right-click in the stacker
table. Some menu commands require you to select one or more physical tapes
before activating the menu; others work with no tapes selected.
The following menu commands are visible. Depending on the stacker’s current
state, some commands may be greyed-out and unavailable:
• Inventory
• Identify tapes...
This option lets you lets you manually identify the tapes currently present in the
stacker from a list of tapes in the database. Use this option after loading tapes that
you had used previously so the miSAN-V-Series can use the same database
entries for the tapes as before. You may find it easier to identify tapes in the data-
base if you rename them from the “Physical tapes” tab when you initially load
them (
“Physical Tapes Tab” on page 97 ).
To help you find the correct set of tapes from the database, the tapes are grouped
into sets that were all loaded at once, and then the groups are sorted chronologi-
cally.
You can choose from the following options to inventory the tapes:
• Inventory unknown tapes
• Inventory selected tapes
• Inventory all tapes
The “Inventory tapes...” option you choose creates a job that sequentially loads
and reads the physical tapes in a physical stacker drive. This enables the miSAN-
V-Series to determine the following information about a tape:
• Tape manufacturer and serial number (if available)
Figure 3-34 Physical Stacker Device Panel