Cybernetics miSAN-V6, Руководство оператора

Страница: 48 / 190

48 Operating the Web Control Panel
Cybernetics UM-MV-86-B1-0801
When Shutdown is selected, a window will appear confirming the HSTC engine shut-
down (See Figure 3-20). Once confirmed, the HSTC engine will complete current
operations. When the HSTC has finished shutting down, another window will appear
saying the miSAN-V-Series is then ready to be powered off. In most cases, shutting
down the miSAN-V-Series, also powers off the machine. If the device is still running
after 30 seconds, then press and hold the power button on the front panel until it pow-
ers off. Failure to log off the iSCSI initiator before shutting down the miSAN-V-Series
will result in error messages
When Reboot is selected, the shutdown routine explained above will occur, and the
miSAN-V-Series will restart and be ready for use again after about 90 seconds.
Note
If the Host machine is connected to the miSAN-V-Series via Microsoft
iSCSI Initiator software, it is necessary to log off the iSCSI connections
before shutting down in order to avoid possible data loss. Failure to log
off the iSCSI connections will cause Microsoft Windows to send
“Unsafe Device Removal” messages. Instructions for this procedure are
found in Appendix A “Microsoft iSCSI Initiator Client.
Figure 3-20 “Confirm shutdown method” Window