Cybernetics miSAN-V6, Руководство оператора

Страница: 79 / 190

79 Operating the Web Control Panel
Cybernetics UM-MV-86-B1-0801
An alternative way to purge the record of an old backup from your backup soft-
ware’s database is to use “Host access” to have your software erase the physical
tape (See
“Host access” on page 81 ). Or, you can delete the old database entry
manually through your software.
• Wait for backup
While “Wait for backup” is set, any job to offload the virtual tape to physical tape
will wait for the host to do a backup before offloading. The miSAN-V-Series will
clear the “Wait for backup” flag when the host does a backup.
Select the “Wait for backup” option if the virtual tape does not contain any data
that you want to offload to the physical tape (e.g., if the virtual tape was already
offloaded successfully). Deselect the “Wait for backup” option if the virtual tape
does contain data from a backup that you want to offload. “Wait for backup” is
always selected if you choose “Copy PT header -> VT” or “Copy PT -> VT”. “Wait
for backup” is selected by default if you choose “Erase VT” or if the virtual tape is
already blank, but you can deselect it if desired.
• Offload disk to tape...
Once you have setup offloading, use this option to create a job that does the
actual work of copying the virtual tape to physical tape.
Note
“Offload disk to tape...” creates a new set of jobs each time you use it. If
you had suspended an offload job and you want to resume that job
instead, you can do so from the “Jobs” tab.
Figure 3-32 “Offload disk to tape” Window