Figure 24: 2.4 GHz 24dBi Dipole Assembly Procedures (Vertical Polarity)
4.7 Weatherproofing RF Connections
Once you have mounted and secured your antenna, we recommend completing the
installation by properly weatherproofing the RF connector. The connector will be
waterproof, durable, and easy to service if it needs to be removed. You will need:
•
Electrical
tape
•
Rubber tape (butyl), a thick, sticky sealing tape commonly known as
“vapor wrap”. We recommend 3M 3339 tape.
Step 1. Connect Cable Assembly to Antenna or Enclosure
Attach the RF cable to the enclosure by fastening the N-type Male connector to the N-
type Female connector. Note: Ensure both connectors are clean and dry, the hand-
tighten the connector firmly.
Trailblazer Installation and User Manual
29