4
Field Installation Options
4.1 Mounting the Enclosure
The versatile mounting bracket assembly (PN: 900-
7200) allows the Trailblazer enclosure to be
properly mounted on a pole up to 2.25” in diameter.
The mounting bracket assembly also converts to a
wall mount for mounting the Trailblazer enclosure
on a flat surface. See below for details for the two
different mounting applications.
Figure 19: Wall mounting the Trailblazer enclosure
Wall Mounting Instructions:
•
Attach the mounting flanges to the enclosure using the ¼ -20 x 1” bolts,
¼” flat washers, ¼” lock washers and ¼” hex nuts.
•
Tighten the ¼” nuts to maximum of 25 in-lbs (2.1 ft-lbs).
Do not over
tighten!
•
Position the enclosure on the wall.
•
It is recommended that you attach the enclosure to the wall using a lock
washer and fasteners of your choice as shown in figure 18 above.
•
Tighten the fasteners of your choice.
Do not over tighten!
Trailblazer Installation and User Manual
21
